XMC pulse stand-alone dust collector is a new type of pulse dust collector improved on the basis of national standard MC-II and Japanese TBF bag type dust collector. It combines the advantages of various types of back-blow pulse precipitators and overcomes the dust removal intensity of the compartment. Not enough, the disadvantages of uneven distribution of inlet and outlet winds have expanded the scope of application.
The structure of XMC type dust collector has its characteristics, so it improves the dust collection efficiency and adaptability, and prolongs the service life of the filter bag. After many years of production practice, the equipment runs stably, the combination range is large, and the maintenance amount is small. . This series of dust collector can combine a variety of different types of dust collectors according to different specifications of solenoid valves. This series of dust collectors can be operated under negative pressure or positive pressure without any change in the structure of the body. The dust collection efficiency is more than 99.8%. If the concentration is less than 100mg / m³, if this series of dust collector is used in cold areas or when the smoke is below zero, an additional insulation heating device should be added, and the casing should be changed accordingly.
The use of XMC type pulse stand-alone dust collector:
XMC type pulse stand-alone dust collector is widely used in dust and fume collection systems such as crushing, mills, furnaces, and dryers in asphalt mixing buildings. The material of the dust collector filter bag is polyester needle felt, which allows continuous use. The temperature is less than or equal to 120 ° C. If the filter bag is made of Metas high temperature needle felt, its allowable temperature can reach 204 ° C.