Technical parameters of DMF-Z electromagnetic pulse valve :
Working pressure: 0.4 ～ 0.7
Ambient temperature: -10 ～ 55 (℃)
Media: Clean air Diaphragm life: more than 1 million blows Connection thread: ZG2 "
DMF-Z type electromagnetic pulse valve is a right-angle valve with an included angle of 90 ° C. It is suitable for the installation and connection of the gas cylinder and the dust blowing pipe, and the air flow is smooth, and it can provide the dust cleaning gas pulse that meets the requirements.
The working principle of DMF-Z electromagnetic pulse valve:
The DMF-Z type electromagnetic pulse valve is divided into two front and rear air chambers by the diaphragm. When the compressed air is turned on through the orifice and enters the posterior chamber, the pressure of the rear chamber closes the diaphragm to the valve's output port. The pulse valve is in the "closed" state. When the electrical signal of the pulse injection controller is small, the armature of the electromagnetic pulse valve is reset, the vent hole of the rear air chamber is closed, and the pressure of the rear air chamber is raised to make the diaphragm close to the valve outlet, and the electromagnetic pulse valve is in the "closed" state.